Unterschiede

Hier werden die Unterschiede zwischen zwei Versionen angezeigt.

--- projects:mh-et_live_esp32_devkit [2018/07/05 18:55] – [Setup on Arch Linux] cyrus
+++ projects:mh-et_live_esp32_devkit [2018/07/06 16:42] (aktuell) – cyrus
@@ Zeile 41: / Zeile 41: @@
   - ''# screen /dev/ttyUSB0 115200''
   - Es sollte der vertraute Prompt des Python Interpreter auftauchen
+==== MicroPython WLAN Hints ====
+=== Hotspots scannen ===
+<code python>import network
+x=network.WLAN(network.STA_IF)
+x.active(True)
+x.scan()</code>
+=== Mit Hotspot verbinden ===
+<code python>import network
+x=network.WLAN(network.STA_IF)
+x.active(True)
+x.connect("MySSID", "MyPassword")
+x.ifconfig()</code>
+=== TCP Sockets ===
+<code python>import network
+import socket
+x=network.WLAN(network.STA_IF)
+x.active(True)
+x.connect("MySSID", "MyPassword")
+i=socket.getaddrinfo("luxeria.ch", 80)
+print(i)
+[(2, 1, 0, 'luxeria.ch', ('95.143.172.238', 80))]</code>
+==== C WLAN Hints ====
+=== Configuring an AP ===
+Das folgende Code Schnipsel erzeugt einen Access Point mit DHCP (192.168.4.0/24):
+<code c>#include <WiFi.h>
+const char *ssid = "ESP32ap";
+const char *password = "12345678";
+void setup() {
+    Serial.begin(115200);
+    Serial.println();
+    Serial.print("Configuring access point...");
+    /* You can remove the password parameter if you want the AP to be open. */
+    WiFi.softAP(ssid, password);
+    IPAddress myIP = WiFi.softAPIP();
+    Serial.print("AP IP address: ");
+    Serial.println(myIP);
+}
+void loop() {
+}</code>
+===== Resources =====
+  * http://mh.nodebb.com/topic/2/mh-et-live-esp32-devkit
+  * https://www.espressif.com/en/esp-wroom-32/resources
+  * https://technet.microsoft.com/en-us/library/2008.01.gpperf.aspx?f=255&MSPPError=-2147217396
 ---- dataentry project ----